{"id":21977,"date":"2020-07-06T15:02:35","date_gmt":"2020-07-06T15:02:35","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=21977"},"modified":"2023-12-13T17:42:23","modified_gmt":"2023-12-13T17:42:23","slug":"c1125-bizhub-650i-550i-450i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1125-bizhub-650i-550i-450i","title":{"rendered":"C1125 (bizhub 650i\/550i\/450i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C1125: Tray lift motor\/Up drive malfunction (When FS-540+PI-507 or FS-540SD+PI-507 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray upper limit sensor\/Up (PS204) or tray lower limit sensor\/Up (PS205) is not turned ON (blocked) after the set period of time has elapsed after the tray lift motor\/Up (M201) is energized.<\/td><\/tr>
Trouble isolation<\/td>Post inserter<\/td><\/tr>
Relevant electrical parts<\/td>-Tray lift motor\/Up (M201)
-Tray upper limit sensor\/Up (PS204)
-Tray lower limit sensor\/Up (PS205)
-PI drive board (PIDB)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between M201-relay CN203-PIDB CN54 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M201 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS204-relay CN235-PIDB CN55 for proper connection and correct as necessary.<\/li>
  4. Check the connector between PS205-relay CN235-PIDB CN55 for proper connection and correct as necessary.<\/li>
  5. PS204 I\/O check, sensor check