{"id":22267,"date":"2020-07-08T14:44:31","date_gmt":"2020-07-08T14:44:31","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=22267"},"modified":"2023-12-13T16:52:22","modified_gmt":"2023-12-13T16:52:22","slug":"c9403-c9404-bizhub-650i-550i-450i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c9403-c9404-bizhub-650i-550i-450i","title":{"rendered":"C9403, C9404 (bizhub 650i\/550i\/450i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C9403: CIS LED lighting failure

C9404: CIS LED lighting abnormally<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>C9403: At the CIS gain adjustment, the machine detected that the output of the CIS LED is lower than the specified value.

C9404: After a scan job is completed, the machine detected that the average output of the CIS LED is greater than the specified value.<\/td><\/tr>
Trouble isolation<\/td>Scanner<\/td><\/tr>
Relevant electrical parts<\/td>-CIS cable
-CIS module (CIS)
-CIS power supply (CISPU)
-CPU board (CPUB)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the back side scanning shading shaft for any stain, and clean up it as necessary.<\/li>
  2. Check that the bushing of the back side glass cleaning roller unit is on the standby position.<\/li>
  3. Correct the harness connection between CIS CN2-BASEB CN5 if faulty.<\/li>
  4. Correct the harness connection between CIS CN1-CISPU CN2 if faulty.<\/li>
  5. Check CPUB for proper installation and correct as necessary.<\/li>
  6. Measure the voltage of CISPU CN1-2.