{"id":2261,"date":"2019-05-16T14:38:40","date_gmt":"2019-05-16T14:38:40","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2261"},"modified":"2023-12-27T16:54:13","modified_gmt":"2023-12-27T16:54:13","slug":"30-03-bizhub-c658-c558-c458","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=30-03-bizhub-c658-c558-c458","title":{"rendered":"30-03 (bizhub C658\/C558\/C458)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
JAM type<\/td><\/td>Misfeed at 2nd transfer section <\/td><\/tr>
JAM code<\/td><\/td>30-03 <\/td><\/tr>
JAM detection timing<\/td><\/td>\u2022 The leading edge of paper is not turned ON (unblocked) the paper exit sensor (PS3) since the paper feeding is started.
\u2022 The fusing loop sensor (PS2) is not turned ON (unblocked) even after the lapse of a given period of time after the paper has turned ON (unblocked) registration sensor (PS1).<\/td>		<\/td><\/tr>
<\/td><\/td>
– Paper jam of a sheet of paper left at the 2nd transfer section results, if the registration sensor1 (PS1) is turned ON (unblocked) when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. <\/td><\/tr>
<\/td><\/td>– Paper jam of a sheet of paper left at the 2nd transfer section results, if the registration sensor2 (PS72) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. (bizhub C658\/C558 only) <\/td><\/tr>
<\/td><\/td>– Paper jam of a sheet of paper left at the 2nd transfer section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. <\/td><\/tr>
Misfeed processing location<\/td><\/td>Right door <\/td><\/tr>
Relevant parts<\/td><\/td>\u2022 bizhub C558\/C458: Transport motor (M1)Fusing motor (M3)
\u2022 bizhub C658: Registration motor (M24)
\u2022 bizhub C558\/C458: Registration clutch (CL4)
\u2022 Paper exit clutch (CL8)
\u2022 Registration sensor1 (PS1)
\u2022 Fusing loop sensor (PS2)
\u2022 bizhub C658\/C558: Registration sensor2 (PS72)
\u2022 Paper exit sensor (PS3)
\u2022 Expansion control board (EXCB)
\u2022 Front side board (FRB)MFP board (MFPB) <\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
Step<\/th>Action<\/th>Control signal<\/th>Location of electrical component<\/th><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>PS1 I\/O check, sensor check<\/td>EXCB CN6-3 (ON)<\/td>26-P<\/td><\/tr>
3<\/td>PS2 I\/O check, sensor check<\/td>MFPB CN17E-16 (ON)<\/td>C658\/C558 7-CC458 8-C<\/td><\/tr>
4<\/td>PS72 I\/O check, sensor check<\/td>EXCB CN6-5 (ON)<\/td>26-P<\/td><\/tr>
5<\/td>PS3 I\/O check, sensor check<\/td>MFPB CN17E-7 (ON)<\/td>C658\/C558 7-CC458 8-C<\/td><\/tr>
6<\/td>CL4 operation check<\/td>FRB CN8-7 (CL4_24V)<\/td>4-K<\/td><\/tr>
7<\/td>CL8 operation check<\/td>EXCB CN8<A>-6 (CL8_REM)<\/td>24-T<\/td><\/tr>
8<\/td>M1 operation check<\/td>MFPB CN14E-3 (REM)MFPB CN14E-6 (LOCK)<\/td>1-C<\/td><\/tr>
9<\/td>M3 operation check<\/td>MFPB CN14E-9 (REM)MFPB CN14E-12 (LOCK)<\/td>2-C<\/td><\/tr>
10<\/td>M24 operation check<\/td>EXCB CN7-1 to 4<\/td>26-P<\/td><\/tr>
11<\/td>Replace FRB.<\/a> (Part# A7PUH00500)<\/td>–<\/td>–<\/td><\/tr>
12<\/td>Replace EXCB.<\/a> (Part# A79JH00500)<\/td>–<\/td>–<\/td><\/tr>
13<\/td>MFPB F2E conduction check<\/td>–<\/td>–<\/td><\/tr>
14<\/td>Replace MFPB.<\/a> (C368\/C308\/C258 Part# A7PUH02123 \/ C458 Part# A79MH02102 \/ C558 or C658 Part # A79JH02102))<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n