{"id":2303,"date":"2019-05-16T16:48:09","date_gmt":"2019-05-16T16:48:09","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2303"},"modified":"2023-12-27T16:53:55","modified_gmt":"2023-12-27T16:53:55","slug":"72-16-bizhub-c658-c558-c458","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=72-16-bizhub-c658-c558-c458","title":{"rendered":"72-16 (bizhub C658\/C558\/C458)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
JAM type<\/td><\/td><\/td>Misfeed at FS transport section <\/td><\/tr>
JAM code<\/td><\/td><\/td>72-16 <\/td><\/tr>
JAM detection timing<\/td><\/td><\/td><When FS-533 is installed>
The paper feed sensor (PS101) is not turned ON even after the set period of time has elapsed after the main body’s paper exit sensor (PS3) is turned OFF (unblocked) by the paper.<\/td>		<\/td><\/td><\/tr>
<\/td><\/td><\/td><When FS-533+PK-519 is installed>
The paper feed sensor (PS101) is not turned ON even after the set period of time has elapsed after the paper feed sensor (PS201) is turned ON by the paper. <\/td><\/tr>
<\/td><\/td><\/td><When FS-536 or FS-536SD is installed>
The FNS entrance sensor (PS4) is not turned ON even after the set period of time has elapsed after the RU entrance sensor (PS2) is turned ON (blocked) by the paper. <\/td><\/tr>
<\/td><\/td><\/td><When FS-537 or FS-537SD is installed>
The FNS entrance sensor (PS34) is not turned ON even after the set period of time has elapsed after the RU entrance sensor (PS2) is turned ON (blocked) by the paper. <\/td><\/tr>
Misfeed processing location<\/td><\/td><\/td>Finisher paper feed section (When FS-533 is installed)Horizontal conveyance cover (When FS-536, FS-536SD, FS-537, or FS-537SD is installed) <\/td><\/tr>
Relevant parts<\/td><\/td><\/td><When FS-533 or FS-533+PK-519 is installed>
\u2022 Paper conveyance motor (M101)
\u2022 Paper exit sensor (PS3)
\u2022 Paper feed sensor (PS101)
\u2022 FS control board (FSCB)
\u2022 MFP board (MFPB) <\/td>		<\/td><\/tr>
<\/td><\/td><\/td><When FS-536 or FS-536SD is installed>
\u2022 RU entrance sensor (PS2)
\u2022 FNS entrance sensor (PS4)
\u2022 FS control board (FSCB) <\/td><\/tr>
<\/td><\/td><\/td><When FS-537 or FS-537SD is installed>
\u2022 RU entrance sensor (PS2)
\u2022 FNS entrance sensor (PS34)
\u2022 FS control board (FSCB) <\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n

 When FS-533 or FS-533+PK-519 is installed<\/h2>\n\n\n\n
Step<\/th>Action<\/th>Control signal<\/th>Location of electrical component<\/th><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>PS3 I\/O check, sensor check<\/td>MFPB CN17E-7 (ON)<\/td>5-C<\/td><\/tr>
3<\/td>PS101 I\/O check, sensor check<\/td>FSCB CN111<\/td>FS-533 7-D to E<\/td><\/tr>
4<\/td>PS201 I\/O check, sensor check<\/td>PKCB CN204<\/td>FS-533 (PK-519) 5-C<\/td><\/tr>
5<\/td>M101 operation check<\/td>FSCB CN101<\/td>FS-533 6-J<\/td><\/tr>
6<\/td>FSCB CP101 conduction check<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB (Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2))<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace MFPB.<\/a> (C458 Part# A79MH02102 \/ C558 or C658 Part # A79JH02102)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n