{"id":24024,"date":"2020-09-18T12:43:41","date_gmt":"2020-09-18T12:43:41","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=24024"},"modified":"2023-12-13T16:48:17","modified_gmt":"2023-12-13T16:48:17","slug":"c0206-bizhub-360i-300i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0206-bizhub-360i-300i","title":{"rendered":"C0206 (bizhub 360i\/300i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

When PC-116 or PC-216 is installed<\/h2>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0206: Tray 3 feeder up\/down abnormality (When PC-116 or PC-216 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 3 upper limit sensor (PS116) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 3<\/td><\/tr>
Relevant electrical parts<\/td>-Tray 3 lift-up motor (M113)
-Tray 3 upper limit sensor (PS116)
-PC control board (PCCB)
-CPU board (CPUB)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Remove the tray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M113-PCCB CN6C for proper connection and correct as necessary.<\/li>
  3. Check the connector of M113 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS116-relay CN24-PCCB CN4 for proper connection and correct as necessary.<\/li>
  5. Check CPUB for proper installation and correct as necessary.<\/li>
  6. PS116 I\/O check, sensor check