{"id":24032,"date":"2020-09-18T13:12:59","date_gmt":"2020-09-18T13:12:59","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=24032"},"modified":"2023-12-13T16:48:17","modified_gmt":"2023-12-13T16:48:17","slug":"c0214-bizhub-360i-300i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0214-bizhub-360i-300i","title":{"rendered":"C0214 (bizhub 360i\/300i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0214: Transfer LCT shift failure (When PC-416 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>-The shifter stop \/ lower limit position sensor (PS138) is not turned ON (blocked) even after the set period of time has elapsed after the shift operation began (shift to the right).

-The shifter home sensor (PS139) is not turned OFF (unblocked) even after the set period of time has elapsed after the shift operation began (shift to the right).

-The shifter stop \/ lower limit position sensor (PS138) is not turned OFF (unblocked) even after the set period of time has elapsed after the return operation began (shift to the left).

-The shifter home sensor (PS139) is not turned ON (blocked) even after the set period of time has elapsed after the return operation began (shift to the left).<\/td><\/tr>
Trouble isolation<\/td>LCT<\/td><\/tr>
Relevant electrical parts<\/td>-Shifter stop \/ lower limit position sensor (PS138)
-Shifter home sensor (PS139)
-Shifter motor (M133)
-PC control board (PCCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Remove the tray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M133-PCCB CN10L for proper connection and correct as necessary.<\/li>
  3. Check the connector of M133 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS138-relay CN16-PCCB CN14L for proper connection and correct as necessary.<\/li>
  5. Check the connector between PS139-relay CN16-PCCB CN14L for proper connection and correct as necessary.<\/li>
  6. PS138 I\/O check, sensor check