{"id":24064,"date":"2020-09-18T14:23:30","date_gmt":"2020-09-18T14:23:30","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=24064"},"modified":"2023-12-13T16:24:41","modified_gmt":"2023-12-13T16:24:41","slug":"c1144-bizhub-360i-300i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1144-bizhub-360i-300i","title":{"rendered":"C1144 (bizhub 360i\/300i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

When FS-539 or FS-539SD is installed<\/h2>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C1144: Pre-eject drive motor drive malfunction (When FS-539 or FS-539SD is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>-The pre-eject home sensor (PS21) is not turned OFF (unblocked) after the set period of time has elapsed after the trailing edge stopper drive starts from the home position.
Or, the trailing edge stopper does not reach the specified position within the set period of time.

-The pre-eject home sensor (PS21) is not turned ON (blocked) after the set period of time has elapsed after the pre-eject drive motor (M9) is energized when the trailing edge stopper returned to the home position.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>-Pre-eject drive motor (M9)
-Pre-eject home sensor (PS21)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between M9-relay CN7A-FSCB J13 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M9 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS21-relay CN8-relay CN7B-FSCB J12 for proper connection and correct as necessary.<\/li>
  4. PS21 I\/O check, sensor check