{"id":2414,"date":"2019-05-18T00:13:37","date_gmt":"2019-05-18T00:13:37","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2414"},"modified":"2023-12-27T16:53:12","modified_gmt":"2023-12-27T16:53:12","slug":"c0202-bizhub-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0202-bizhub-c554e-c454e","title":{"rendered":"C0202 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

\n\n(1)Contents<\/p>\n\n\n\n
Trouble type<\/td>Tray 1 feeder up\/down abnormality<\/td><\/tr>
Trouble code<\/td>C0202<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td>The tray 1 upper limit sensor (PS25) is not blocked even after the lapse of a given period of time after the lifting motion has been started.<\/td><\/tr>
Trouble isolation<\/td>Tray 1<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Tray 1 lift-up motor (M12)
\u2022 Tray 1 upper limit sensor (PS25)
\u2022 Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M12-PRCB CN25 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M12 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS25-relay CN30-PRCB CN26 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS25 I\/O check, sensor check<\/td>PRCB CN26-3 (ON)<\/td>7-C<\/td><\/tr>
5<\/td>M12 operation check<\/td>PRCB CN25-5 (REM)<\/td>1-C<\/td><\/tr>
6<\/td>Replace M12<\/a> (Part # ( 9J06M10300)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>PRCB ICP5 conduction check<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace PRCB<\/a> (C554e Part# A5AYH00101 \/ C454e Part# A5C0H00101)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n