{"id":2457,"date":"2019-05-20T14:20:20","date_gmt":"2019-05-20T14:20:20","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2457"},"modified":"2023-12-27T16:52:55","modified_gmt":"2023-12-27T16:52:55","slug":"c1104-bizhub-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1104-bizhub-c554e-c454e","title":{"rendered":"C1104 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

\n\n(1)Contents<\/p>\n\n\n\n
Trouble type<\/td>Exit roller motors malfunction<\/td><\/tr>
Trouble code<\/td>C1104<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-535 is installed>
Even after a predetermined period of time has elapsed since the exit roller motor (M4) starts operation, the lock signal is not set to L (turning). <\/td>		<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Exit roller motor (M4)
\u2022 FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M4-FSCB CN18 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M4 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>M4 operation check<\/td>FSCB CN18-4 to 11<\/td>FS-535 14-D<\/td><\/tr>
4<\/td>Replace M4<\/a> (Part# A11PM10200)<\/td>–<\/td>–<\/td><\/tr>
5<\/td>FSCB ICP14 conduction check<\/td>–<\/td>–<\/td><\/tr>
6<\/td>Replace FSCB<\/a> (Part# A2Y1H10002)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n