{"id":24579,"date":"2021-02-03T18:44:28","date_gmt":"2021-02-03T18:44:28","guid":{"rendered":"http:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=24579"},"modified":"2023-12-13T15:59:31","modified_gmt":"2023-12-13T15:59:31","slug":"c0206-bizhub-4750i-4050i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0206-bizhub-4750i-4050i","title":{"rendered":"C0206 (bizhub 4750i\/4050i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0206: Tray 3 feeder up\/down abnormality (When PF-P20 or PF-P21 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 3 upper limit sensor (PS2\/3) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 3<\/td><\/tr>
Relevant electrical parts<\/td>-Tray 3 lift-up motor (M2\/3)
-Tray 3 upper limit sensor (PS2\/3)
-Tray 3 PC control board (PCCB\/3)
-CPU board (CPUB)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Remove the tray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M2\/3-PCCB\/3 CN4 for proper connection and correct as necessary.<\/li>
  3. Check the connector of M2\/3 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS2\/3-PCCB\/3 CN3 for proper connection and correct as necessary.<\/li>
  5. Check the connector between PCCB\/3 CN1-relay CN2PC-PCCB\/2 CN2 for proper connection and correct as necessary.<\/li>
  6. Check the connector between PCCB\/2 CN1-relay CN24-BASEB CN21E for proper connection and correct as necessary.<\/li>
  7. Check CPUB for proper installation and correct as necessary.<\/li>
  8. PS2\/3 I\/O check, sensor check