{"id":25276,"date":"2023-09-26T13:22:00","date_gmt":"2023-09-26T13:22:00","guid":{"rendered":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=25276"},"modified":"2023-12-13T14:35:08","modified_gmt":"2023-12-13T14:35:08","slug":"c0202-bizhub-950i-850i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0202-bizhub-950i-850i","title":{"rendered":"C0202 (bizhub 950i\/850i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/strong><\/h2>\n\n\n\n
Trouble type<\/td>C0202: Tray 1 feeder up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 1 upper limit sensor (PS6) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 1<\/td><\/tr>
Relevant electrical parts<\/td>– Tray 1 upper limit sensor (PS6)
– Tray 1 lift-up motor (M6)
– Paper feed\/transport drive board (PFTDB)
– CPU board (CPUB)
– Base board (BASEB)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Procedure<\/strong><\/h2>\n\n\n\n
    \n
  1. Remove the tray<\/a> and check to see if a piece of paper is not left inside the machine.<\/li>\n\n\n\n
  2. Check the connector between M6-PFTDB CN25 for proper connection and correct as necessary.<\/li>\n\n\n\n
  3. Check the connector of M6 for proper drive coupling and correct as necessary.<\/li>\n\n\n\n
  4. Check the connector between PS6-relay CN145B-PFTDB CN14 for proper connection and correct as necessary.<\/li>\n\n\n\n
  5. Check CPUB for proper installation and correct as necessary.<\/li>\n\n\n\n
  6. PS6 I\/O check, sensor check\n