{"id":25309,"date":"2023-09-27T13:25:58","date_gmt":"2023-09-27T13:25:58","guid":{"rendered":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=25309"},"modified":"2023-12-13T14:33:17","modified_gmt":"2023-12-13T14:33:17","slug":"c1105-bizhub-950i-850i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1105-bizhub-950i-850i","title":{"rendered":"C1105 (bizhub 950i\/850i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

When FS-539 or FS-539SD is installed<\/strong><\/h2>\n\n\n\n

Contents<\/strong><\/h2>\n\n\n\n
Trouble type<\/td>C1105: Bundle eject motor drive malfunction (When FS-539 or FS-539SD is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The gripper home sensor (PS18) is not turned OFF (blocked) or ON (unblocked) even after the set period of time has elapsed after the bundle eject motor (M10) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>– Bundle eject motor (M10)
– Gripper home sensor (PS18)
– FS control board (FSCB)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Procedure<\/strong><\/h2>\n\n\n\n
    \n
  1. Check the connector between M10-relay CN7A-FSCB J13 for proper connection and correct as necessary.<\/li>\n\n\n\n
  2. Check the connector of M10 for proper drive coupling and correct as necessary.<\/li>\n\n\n\n
  3. Check the connector between PS18-relay CN7A-FSCB J13 for proper connection and correct as necessary.<\/li>\n\n\n\n
  4. PS18 I\/O check, sensor check\n