{"id":25348,"date":"2023-09-28T13:16:59","date_gmt":"2023-09-28T13:16:59","guid":{"rendered":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=25348"},"modified":"2023-12-13T14:33:16","modified_gmt":"2023-12-13T14:33:16","slug":"c1124-bizhub-950i-850i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1124-bizhub-950i-850i","title":{"rendered":"C1124 (bizhub 950i\/850i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/strong><\/h2>\n\n\n\n
Trouble type<\/td>C1124: Tray lift motor\/Lw drive malfunction (When FS-540+PI-507 or FS-540SD+PI-507 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray upper limit sensor\/Lw (PS209) or tray lower limit sensor\/Lw (PS210) is not turned ON (blocked) after the set period of time has elapsed after the tray lift motor\/Lw (M202) is energized.<\/td><\/tr>
Trouble isolation<\/td>Post inserter<\/td><\/tr>
Relevant electrical parts<\/td>– Tray lift motor\/Lw (M202)
– Tray upper limit sensor\/Lw (PS209)
– Tray lower limit sensor\/Lw (PS210)
– PI drive board (PIDB)
– FS control board (FSCB)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Procedure<\/strong><\/h2>\n\n\n\n
    \n
  1. Check the connector between M202-relay CN206-PIDB CN56 for proper connection and correct as necessary.<\/li>\n\n\n\n
  2. Check the connector of M202 for proper drive coupling and correct as necessary.<\/li>\n\n\n\n
  3. Check the connector between PS209-relay CN237-PIDB CN53 for proper connection and correct as necessary.<\/li>\n\n\n\n
  4. Check the connector between PS210-relay CN236-PIDB CN53 for proper connection and correct as necessary.<\/li>\n\n\n\n
  5. PS209 I\/O check, sensor check\n