{"id":25676,"date":"2023-10-05T12:21:28","date_gmt":"2023-10-05T12:21:28","guid":{"rendered":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=25676"},"modified":"2023-12-13T14:11:38","modified_gmt":"2023-12-13T14:11:38","slug":"c6102c6103-bizhub-950i-850i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c6102c6103-bizhub-950i-850i","title":{"rendered":"C6102,C6103 (bizhub 950i\/850i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/strong><\/h2>\n\n\n\n
Trouble type<\/td>– C6102: Drive system home sensor malfunction

– C6103: Slider over running<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>C6102:

– The scanner home sensor (PS201) is unable to detect the scanner located at its home position.

– The scanner home sensor (PS201) is unable to detect a scanner even when the scanner motor (M201) has been driven to move the scanner over the maximum travelling distance

– .The scanner home sensor (PS201) detects the scanner when the scanner has moved the maximum travelling distance from the position, at which it blocks the scanner home sensor (PS201).<\/td><\/tr>
C6103:

The scanner home sensor (PS201) detects the scanner at its home position during a period of time that begins with the time when a prescan command and a scan preparation command are executed and ends when a home return command is executed.<\/td><\/tr>
Trouble isolation<\/td>Scanner<\/td><\/tr>
Relevant electrical parts<\/td>– Scanner home sensor (PS201)
– Scanner motor (M201)
– Scanner drive board (SCDB)
– CPU board (CPUB)
– Base board (BASEB)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Procedure<\/strong><\/h2>\n\n\n\n
    \n
  1. Correct or change the scanner drive (pulley, gear, belt) if it is faulty.<\/li>\n\n\n\n
  2. Correct the scanner motor set screw if loose.<\/li>\n\n\n\n
  3. Adjust [Image Position: Leading Edge] and [Sub Scan Zoom Adj.].<\/li>\n\n\n\n
  4. Check the connector between M201-SCDB CN4 for proper connection and correct as necessary.<\/li>\n\n\n\n
  5. Check the connector between PS201-SCDB CN6 for proper connection and correct as necessary.<\/li>\n\n\n\n
  6. Check the connector between SCDB CN2-BASEB CN1E for proper connection and correct as necessary.<\/li>\n\n\n\n
  7. Check CPUB for proper installation and correct as necessary.<\/li>\n\n\n\n
  8. PS201 I\/O check, sensor check\n