{"id":26237,"date":"2025-06-10T13:21:41","date_gmt":"2025-06-10T13:21:41","guid":{"rendered":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=26237"},"modified":"2025-06-10T14:17:51","modified_gmt":"2025-06-10T14:17:51","slug":"c0204-c4751i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0204-c4751i","title":{"rendered":"C0204 (C4751i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0204: Tray 2 feeder up\/down abnormality (When PF-P27 or PF-P28 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 2 upper limit sensor (PS2\/2) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 2<\/td><\/tr>
Relevant electrical parts<\/td>Tray 2 lift-up motor (M2\/2)Tray 2 upper limit sensor (PS2\/2)Tray 2 PC control board (PCCB\/2)CPU board (CPUB)Base board (BASEB)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Procedure<\/h2>\n\n\n\n
    \n
  1. Remove the tray and check to see if a piece of paper is not left inside the machine.<\/li>\n\n\n\n
  2. Check the connector between M2\/2-PCCB\/2 CN4 for proper connection and correct as necessary.<\/li>\n\n\n\n
  3. Check the connector of M2\/2 for proper drive coupling and correct as necessary.<\/li>\n\n\n\n
  4. Check the connector between PS2\/2-PCCB\/2 CN3 for proper connection and correct as necessary.<\/li>\n\n\n\n
  5. Check the connector between PCCB\/2 CN1-relay CN24-BASEB CN21E for proper connection and correct as necessary.<\/li>\n\n\n\n
  6. Check CPUB for proper installation and correct as necessary.<\/li>\n\n\n\n
  7. PS2\/2 I\/O check, sensor check\n