{"id":26239,"date":"2025-06-10T13:23:37","date_gmt":"2025-06-10T13:23:37","guid":{"rendered":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=26239"},"modified":"2025-06-10T14:18:58","modified_gmt":"2025-06-10T14:18:58","slug":"c0206-c4751i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0206-c4751i","title":{"rendered":"C0206 (C4751i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0206: Tray 3 feeder up\/down abnormality (When PF-P27 or PF-P28 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 3 upper limit sensor (PS2\/3) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 3<\/td><\/tr>
Relevant electrical parts<\/td>Tray 3 lift-up motor (M2\/3)Tray 3 upper limit sensor (PS2\/3)Tray 3 PC control board (PCCB\/3)CPU board (CPUB)Base board (BASEB)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Procedure<\/h2>\n\n\n\n
    \n
  1. Remove the tray and check to see if a piece of paper is not left inside the machine.<\/li>\n\n\n\n
  2. Check the connector between M2\/3-PCCB\/3 CN4 for proper connection and correct as necessary.<\/li>\n\n\n\n
  3. Check the connector of M2\/3 for proper drive coupling and correct as necessary.<\/li>\n\n\n\n
  4. Check the connector between PS2\/3-PCCB\/3 CN3 for proper connection and correct as necessary.<\/li>\n\n\n\n
  5. Check the connector between PCCB\/3 CN1-relay CN2PC-PCCB\/2 CN2 for proper connection and correct as necessary.<\/li>\n\n\n\n
  6. Check the connector between PCCB\/2 CN1-relay CN24-BASEB CN21E for proper connection and correct as necessary.<\/li>\n\n\n\n
  7. Check CPUB for proper installation and correct as necessary.<\/li>\n\n\n\n
  8. PS2\/3 I\/O check, sensor check\n