{"id":26243,"date":"2025-06-10T13:39:04","date_gmt":"2025-06-10T13:39:04","guid":{"rendered":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=26243"},"modified":"2025-06-10T14:21:18","modified_gmt":"2025-06-10T14:21:18","slug":"c0210-c4751i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0210-c4751i","title":{"rendered":"C0210 (C4751i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0210: LCT lift failure (When PC-419 or PC-420 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The LCT upper limit sensor (PS2) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation began.The LCT upper limit sensor (PS2) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operating.The LCT upper limit sensor (PS2) is not turned ON (unblocked) even after the set period of time has elapsed after the paper lift-down operation began.<\/td><\/tr>
Trouble isolation<\/td>LCT<\/td><\/tr>
Relevant electrical parts<\/td>LCT lift-up motor (M2)LCT upper limit sensor (PS2)PC control board (PCCB)CPU board (CPUB)Base board (BASEB)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Procedure<\/h2>\n\n\n\n
    \n
  1. Remove the tray<\/a> and check to see if a piece of paper is not left inside the machine.<\/li>\n\n\n\n
  2. Check the connector between M2-PCCB CN4 for proper connection and correct as necessary.<\/li>\n\n\n\n
  3. Check the connector of M2 for proper drive coupling and correct as necessary.<\/li>\n\n\n\n
  4. Check the connector between PS2-relay CN11PC-PCCB CN3 for proper connection and correct as necessary.<\/li>\n\n\n\n
  5. Check the connector between PCCB CN1-relay CN24-BASEB CN21E for proper connection and correct as necessary.<\/li>\n\n\n\n
  6. Check CPUB for proper installation and correct as necessary.<\/li>\n\n\n\n
  7. PS2 I\/O check, sensor check\n