{"id":2695,"date":"2019-05-21T19:15:22","date_gmt":"2019-05-21T19:15:22","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2695"},"modified":"2023-12-27T16:50:54","modified_gmt":"2023-12-27T16:50:54","slug":"c1114-bizhub-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1114-bizhub-c554e-c454e","title":{"rendered":"C1114 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

\n\n(1)Contents<\/p>\n\n\n\n
Trouble type<\/td>Center-staple front adjust drive motor malfunction<\/td><\/tr>
Trouble code<\/td>C1114<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534+SD-511 is installed><When FS-535+SD-512 is installed>
The alignment home sensor (PS4) is not blocked or unblocked even after the set period of time has elapsed after the alignment motor (M3) is turned ON. <\/td>		<\/td><\/tr>
Trouble isolation<\/td>Half-Fold\/Tri-Fold Center Stapling<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534+SD-511 is installed><When FS-535+SD-512 is installed>
\u2022 Alignment motor (M3)
\u2022 Alignment home sensor (PS4)
\u2022 SD drive board (SDDB)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-534+SD-511 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M3-relay CN10-SDDB J7 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M3 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS4-relay CN10-SDDB J7 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS4 I\/O check, sensor check<\/td>SDDB J7-6 (ON)<\/td>SD-511 6-F<\/td><\/tr>
5<\/td>M3 operation check<\/td>SDDB J7-7 to 10<\/td>SD-511 5-F to G<\/td><\/tr>
6<\/td>Replace M3<\/a> (Part# A3ERPP3N00)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace SDDB<\/a> (Part# A3ERPP6J03)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n