{"id":2714,"date":"2019-05-21T19:24:13","date_gmt":"2019-05-21T19:24:13","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2714"},"modified":"2023-12-27T16:50:54","modified_gmt":"2023-12-27T16:50:54","slug":"c1115-bizhub-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1115-bizhub-c554e-c454e","title":{"rendered":"C1115 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

\n\n(1)Contents<\/p>\n\n\n\n
Trouble type<\/td>Center fold knife motors malfunction<\/td><\/tr>
Trouble code<\/td>C1115<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534+SD-511 is installed>
The center fold knife home sensor (PS8) is not blocked or unblocked even after the set period of time has elapsed after the center fold knife motor (M9) is turned ON.

<When FS-535+SD-512 is installed>
The center fold home sensor (PS8) is not blocked even after the set period of time has elapsed while the center fold knife motor (M9) is energized. <\/td>		<\/td><\/tr>
Trouble isolation<\/td>Half-Fold\/Tri-Fold Center Stapling<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534+SD-511 is installed>
\u2022 Center fold knife motor (M9)
\u2022 Center fold knife home sensor (PS8)
\u2022 SD drive board (SDDB)
\u2022 FS control board (FSCB)

<When FS-535+SD-512 is installed>
\u2022 Center fold knife motor (M9)
\u2022 Center fold home sensor (PS8)
\u2022 SD drive board (SDDB)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-534+SD-511 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M9-SDDB J11 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M9 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS8-relay CN10-SDDB J7 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS8 I\/O check, sensor check<\/td>SDDB J7-3 (ON)<\/td>SD-511 6-G<\/td><\/tr>
5<\/td>M9 operation check<\/td>SDDB J11-11 to 20<\/td>SD-511 1 to 2-B<\/td><\/tr>
6<\/td>Replace M9<\/a> (Part# A3ERPP4S00Old or A3ERPP4S01)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace SDDB<\/a> (Part# A3ERPP6J03)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n