{"id":2717,"date":"2019-05-21T19:31:22","date_gmt":"2019-05-21T19:31:22","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2717"},"modified":"2023-12-27T16:50:54","modified_gmt":"2023-12-27T16:50:54","slug":"c1124-bizhub-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1124-bizhub-c554e-c454e","title":{"rendered":"C1124 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

\n\n(1)Contents<\/p>\n\n\n\n
Trouble type<\/td>Sheet feeder up\/down drive failure (lower)<\/td><\/tr>
Trouble code<\/td>C1124<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-535+PI-505 is installed>
The tray upper limit sensor \/Lw (PS209) or tray lower limit sensor \/Lw (PS210) are not turned ON even after the set period of time has elapsed after the tray lift motor \/Lw (M202) is energized. <\/td>		<\/td><\/tr>
Trouble isolation<\/td>Post Inserter<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Tray lift motor \/Lw (M202)
\u2022 Tray upper limit sensor \/Lw (PS209)
\u2022 Tray lower limit sensor \/Lw (PS210)
\u2022 PI drive board (PIDB)
\u2022 FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M202-relay CN206-PIDB CN56 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M202 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS209-relay CN237-PIDB CN53<A> for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>Check the connector between PS210-relay CN236-PIDB CN53<A> for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
5<\/td>PS209 I\/O check, sensor check<\/td>PIDB CN53<A>-8 (ON)<\/td>PI-505 8-C to D<\/td><\/tr>
6<\/td>PS210 I\/O check, sensor check<\/td>PIDB CN53<A>-11 (ON)<\/td>PI-505 9-C to D<\/td><\/tr>
7<\/td>M202 operation check<\/td>PIDB CN56-5 to 6<\/td>PI-505 7-C to D<\/td><\/tr>
8<\/td>Replace M202 (Part# A10YA6560)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>PIDB ICP2 conduction check<\/td>–<\/td>–<\/td><\/tr>
10<\/td>Replace PIDB<\/a> (Part#A10AH01001)<\/td>–<\/td>–<\/td><\/tr>
11<\/td>Replace FSCB<\/a> (Part# A2Y1H10002)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n