{"id":2749,"date":"2019-05-21T20:43:35","date_gmt":"2019-05-21T20:43:35","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2749"},"modified":"2023-12-27T16:50:54","modified_gmt":"2023-12-27T16:50:54","slug":"10-02-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=10-02-c554e-c454e","title":{"rendered":"10-02 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

Contents<\/p>\n\n\n\n
JAM type<\/td>Misfeed at manual bypass feed section<\/td><\/td><\/tr>
JAM code<\/td>10-02<\/td><\/td><\/tr>
Detection timing<\/td>For paper fed from the manual bypass, loop forming has not been complete before a sheet enters the registration roller because the rise timing of load to perform registration is earlier than the rise timing of load to form a loop.<\/td><\/td><\/tr>
<\/td> \u2013 In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened \/ closed or jam\/trouble reset is done, it is regarded as paper jam at manual bypass feed section. <\/td><\/tr>
Misfeed processing location<\/td>Right door<\/td><\/td><\/tr>
Relevant parts<\/td>\u2022 Paper feed motor (M22) 
\u2022 Registration motor (M24) 
\u2022 Bypass paper feed clutch (CL7) 
\u2022 Bypass pick-up solenoid (SD1) 
\u2022 Registration sensor (PS1) 
\u2022 Front side board (FRB) 
\u2022 Expansion control board (EXCB) 
\u2022 Printer control board (PRCB)<\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical component<\/td><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>\u2013<\/td>\u2013<\/td><\/tr>
2<\/td>PS1 I\/O check, sensor check<\/td>FRB CN8-3 (ON)<\/td>3-L<\/td><\/tr>
3<\/td>CL7 operation check<\/td>PRCB CN27-8 (ON)<\/td>3-C<\/td><\/tr>
4<\/td>SD1 operation check<\/td>PRCB CN27-10 (ON)<\/td>4-C<\/td><\/tr>
5<\/td>M22 operation check<\/td>EXCB CN3-5 to 8<\/td>22-P<\/td><\/tr>
6<\/td>M24 operation check<\/td>EXCB CN3-1 to 4<\/td>21-P<\/td><\/tr>
7<\/td>Replace FRB <\/a> (Parts# A7PUH00500 )<\/td>\u2013<\/td>\u2013<\/td><\/tr>
8<\/td>Replace EXCB <\/a> (Part# A5AYH00501)<\/td>\u2013<\/td>\u2013<\/td><\/tr>
9<\/td>PRCB ICP5 conduction check<\/td>\u2013<\/td>\u2013<\/td><\/tr>
10<\/td>Replace PRCB<\/a>\u00a0(C554e Part# A5AYH00101 \/ C454e Part# A5C0H00101)<\/td>\u2013<\/td>\u2013<\/td><\/tr><\/tbody><\/table>\n\n\n\n