{"id":2777,"date":"2019-05-22T13:54:39","date_gmt":"2019-05-22T13:54:39","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2777"},"modified":"2023-12-27T16:50:38","modified_gmt":"2023-12-27T16:50:38","slug":"c1132-bizhub-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1132-bizhub-c554e-c454e","title":{"rendered":"C1132 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

\n\n(1)Contents<\/p>\n\n\n\n
Trouble type<\/td>Punch drive motors malfunction<\/td><\/tr>
Trouble code<\/td>C1132<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-533+PK-519 is installed>
\u2022 The puncher drive cam sensor (PS203) or puncher home sensor (PS204) is not blocked or unblocked even after the set period of time has elapsed while the punch motor (M201) is energized.
\u2022 The punch motor sensor (PS202) does not turn ON after the punch motor (M201) stopped.
\u2022 The holes with other marketing area is set in [Service Mode] -> [Finisher] -> [Punch Option Setting]<\/a>

<When FS-534+PK-520 is installed>
The punch home sensor (PS1) is not blocked or unblocked even after the set period of time has elapsed while the punch drive motor (M1) is energized.

<When FS-535+PK-521 is installed>
The PK punch home sensor\/2 (PS301) is not blocked or unblocked even after the set period of time has elapsed while the punch drive motor (M301) is energized. <\/td>
<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-533+PK-519 is installed>
\u2022 Punch motor (M201)
\u2022 Punch motor sensor (PS202)
\u2022 Puncher drive cam sensor (PS203)
\u2022 Puncher home sensor (PS204)
\u2022 PK control board (PKCB)
\u2022 FS control board (FSCB)

<When FS-534+PK-520 is installed>
\u2022 Punch drive motor (M1)
\u2022 Punch home sensor (PS1)
\u2022 FS control board (FSCB)

<When FS-535+PK-521 is installed>
\u2022 Punch drive motor (M301)
\u2022 PK punch home sensor\/2 (PS301)
\u2022 Punch control board (PKCB)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-533+PK-519 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the number of the holes in [Service Mode] -> [Finisher] -> [Punch Option Setting]<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector between M201-PKCB CN203 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector of M201 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>Check the connector between PS202-PKCB CN204 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
5<\/td>Check the connector between PS203-PKCB CN204 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
6<\/td>Check the connector between PS204-PKCB CN204 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
7<\/td>PS202 I\/O check, sensor check<\/td>PKCB CN204<\/td>FS-533 (PK-519) 5-C<\/td><\/tr>
8<\/td>PS203 I\/O check, sensor check<\/td>PKCB CN204<\/td>FS-533 (PK-519) 6-C<\/td><\/tr>
9<\/td>PS204 I\/O check, sensor check<\/td>PKCB CN204<\/td>FS-533 (PK-519) 6-C<\/td><\/tr>
10<\/td>M201 operation check<\/td>PKCB CN203-1 to 2<\/td>FS-533 (PK-519) 4-C<\/td><\/tr>
11<\/td>Replace M201<\/a> (Part# A3EWPP3201)<\/td>–<\/td>–<\/td><\/tr>
12<\/td>PKCB F201 conduction check<\/td>–<\/td>–<\/td><\/tr>
13<\/td>Replace PKCB<\/a> (Part# A3EWPP3102)<\/td>–<\/td>–<\/td><\/tr>
14<\/td>Replace FSCB<\/a> (Part # A2YUPPH901 for Model No. A2YU-WY1 or Part # A2YUPPXN00 for Model No. A2YU-WY2)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n