{"id":2925,"date":"2019-05-23T14:15:13","date_gmt":"2019-05-23T14:15:13","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2925"},"modified":"2023-12-27T16:48:38","modified_gmt":"2023-12-27T16:48:38","slug":"c1145-bizhub-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1145-bizhub-c554e-c454e","title":{"rendered":"C1145 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

\n\n(1)Contents<\/p>\n\n\n\n
Trouble type<\/td>Trailing edge stopper motors malfunction<\/td><\/tr>
Trouble code<\/td>C1145<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534 is installed>
The trailing edge stopper home position detection sensor (PS20) is not blocked or unblocked even after the set period of time has elapsed after the trailing edge stopper motor (M6) is turned ON.

<When FS-535 is installed>
\u2022 The trailing edge stopper home sensor (PS22) is not blocked or unblocked even after the set period of time has elapsed after the trailing edge stopper motor (M19) is turned ON.
\u2022 The trailing edge stopper standby sensor\/1 (PS23) is not blocked or unblocked even after the set period of time has elapsed after trailing edge stopper motor (M19) is turned ON.
\u2022 The trailing edge stopper standby sensor\/2 (PS42) is not blocked or unblocked even after the set period of time has elapsed after the trailing edge stopper motor (M19) is turned ON. <\/td>		<\/td><\/tr>
<\/td>

<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534 is installed>
\u2022 Trailing edge stopper motor (M6)
\u2022 Trailing edge stopper home position detection sensor (PS20)
\u2022 FS control board (FSCB)

<When FS-535 is installed>
\u2022 Trailing edge stopper motor (M19)
\u2022 Trailing edge stopper home sensor (PS22)
\u2022 Trailing edge stopper standby sensor\/1 (PS23)
\u2022 Trailing edge stopper standby sensor\/2 (PS42)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-534 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M6-FSCB J5 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M6 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS20-relay CN22-FSCB J5 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS20 I\/O check, sensor check<\/td>FSCB J5-9 (ON)<\/td>FS-534 9-K<\/td><\/tr>
5<\/td>M6 operation check<\/td>FSCB J5-13 to 16<\/td>FS-534 9-K<\/td><\/tr>
6<\/td>Replace M6<\/a> (Part# A3EPPP5500)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n