{"id":2951,"date":"2019-05-23T14:21:15","date_gmt":"2019-05-23T14:21:15","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=2951"},"modified":"2023-12-27T16:48:38","modified_gmt":"2023-12-27T16:48:38","slug":"c1152-bizhub-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1152-bizhub-c554e-c454e","title":{"rendered":"C1152 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

\n\n(1)Contents<\/p>\n\n\n\n
Trouble type<\/td>Paper transport belt motors malfunction<\/td><\/tr>
Trouble code<\/td>C1152<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-535+SD-512 is installed>
Even after a predetermined period of time has elapsed since the paper transport belt motor (M34) starts operation, the lock signal is not set to L (turning). <\/td>		<\/td><\/tr>
Trouble isolation<\/td>Half-Fold\/Tri-Fold Center Stapling<\/td><\/tr>
Relevant electrical parts<\/td>Paper transport belt motor (M34)SD drive board (SDDB)FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connectors between M34-relay CN1-FSCB CN42 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M34 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>M34 operation check<\/td>SDDB CN1-1 to 11<\/td>SD-512 7-D<\/td><\/tr>
4<\/td>Replace M34 (Part# A0PNM10200)<\/td>–<\/td>–<\/td><\/tr>
5<\/td>FSCB ICP12 conduction check<\/td>–<\/td>–<\/td><\/tr>
6<\/td>Replace SDDB<\/a> (Part# A3ERPP6J03)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB<\/a> (Part# A2Y1H10002)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n