{"id":312,"date":"2019-04-22T18:36:38","date_gmt":"2019-04-22T18:36:38","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=312"},"modified":"2023-12-27T18:18:21","modified_gmt":"2023-12-27T18:18:21","slug":"c0204-bizhub-c360i-c300i-c250i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0204-bizhub-c360i-c300i-c250i","title":{"rendered":"C0204 (bizhub C360i\/C300i\/C250i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0204: Tray 2 feeder up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 2 upper limit sensor (PS22) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 2<\/td><\/tr>
Relevant electrical parts<\/td>\u2022Tray 2 lift-up motor (M13)
\u2022 Tray 2 upper limit sensor (PS22)
\u2022 CPU board (CPUB)
\u2022 Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Remove the tray<\/a> and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M13-relay CN181-BASEB CN25E for proper connection and correct as necessary.<\/li>
  3. Check the connector of M13 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS22-relay CN40-BASEB CN23E for proper connection and correct as necessary.<\/li>
  5. Check CPUB for proper installation and correct as necessary.<\/li>
  6. PS22 I\/O check, sensor check