{"id":3393,"date":"2019-05-24T14:56:47","date_gmt":"2019-05-24T14:56:47","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=3393"},"modified":"2023-12-27T15:18:08","modified_gmt":"2023-12-27T15:18:08","slug":"72-16-bizhub-c554e-c454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=72-16-bizhub-c554e-c454e","title":{"rendered":"72-16 (bizhub C554e\/C454e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
JAM type<\/td>FS transport section<\/td><\/tr>
JAM code<\/td>72-16<\/td><\/tr>
Detection timing<\/td><When FS-533 is installed>
The paper feed sensor (PS101) is not turned ON even after the set period of time has elapsed after the main body’s paper exit sensor (PS3) is unblocked by the paper. <\/td>		<\/td><\/td><\/tr>
<\/td><When FS-533+PK-519 is installed>
The paper feed sensor (PS101) is not turned ON even after the set period of time has elapsed after the paper feed sensor (PS201) is turned ON by the paper.<\/td><\/tr>
<\/td><When FS-534 is installed>
The FNS entrance sensor (PS4) is not turned ON even after the set period of time has elapsed after the RU entrance sensor (PS2) is blocked by the paper.<\/td><\/tr>
<\/td><When FS-535 is installed>
The FNS entrance sensor (PS1) is not turned ON even after the set period of time has elapsed after the RU transport sensor (PS60) is blocked by the paper.<\/td><\/tr>
Misfeed processing location<\/td>\u2022 Finisher paper feed section <When FS-533 is installed>
\u2022 Horizontal conveyance cover <When FS-534 or FS-535 is installed><\/td><\/tr>
Relevant parts<\/td><When FS-533 is installed>
\u2022 Paper conveyance motor (M101)
\u2022 Paper exit sensor (PS3)
\u2022 Paper feed sensor (PS101)
\u2022 FS control board (FSCB)
\u2022 Printer control board (PRCB) <\/td>		<\/td><\/tr>
<\/td><When FS-533+PK-519 is installed>
\u2022 Paper conveyance motor (M101)
\u2022 Paper feed sensor (PS101)
\u2022 Paper feed sensor (PS201)
\u2022 FS control board (FSCB)
\u2022 Printer control board (PRCB)<\/td><\/tr>
<\/td><When FS-534 is installed>
\u2022 RU entrance sensor (PS2)
\u2022 FNS entrance sensor (PS4)
\u2022 FS control board (FSCB)<\/td><\/tr>
<\/td><When FS-535 is installed>
\u2022 RU transport sensor (PS60)
\u2022 FNS entrance sensor (PS1)
\u2022 FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-533 or FS-533+PK-519 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical component<\/td><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>PS3 I\/O check, sensor check<\/td>PRCB CN21-7 (ON)<\/td>bizhub C554e\/C454e 16-C<\/td><\/tr>
3<\/td>PS101 I\/O check, sensor check<\/td>FSCB CN111<\/td>FS-533 7-D to E<\/td><\/tr>
4<\/td>PS201 I\/O check, sensor check<\/td>PKCB CN204<\/td>FS-533 (PK-519) 5-C<\/td><\/tr>
5<\/td>M101 operation check<\/td>FSCB CN101<\/td>FS-533 6-J<\/td><\/tr>
6<\/td>FSCB CP101 conduction check<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB<\/a> (Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2))<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace PRCB<\/a> (C554e Part# A5AYH00101 \/ C454e Part# A5C0H00101)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n