{"id":361,"date":"2019-04-23T13:40:13","date_gmt":"2019-04-23T13:40:13","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=361"},"modified":"2023-12-27T18:18:03","modified_gmt":"2023-12-27T18:18:03","slug":"c1140-bizhub-c360i-c300i-c250i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1140-bizhub-c360i-c300i-c250i","title":{"rendered":"C1140 (bizhub C360i\/C300i\/C250i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C1140: Alignment motor\/Rr drive malfunction<\/td><\/td><\/tr>
Rank<\/td>B<\/td><\/td><\/tr>
Trouble detection condition<\/td><When FS-533 is installed>
\u2022 The alignment plate home sensor\/Rr (PS109) is not turned OFF (unblocked) after the set period of time has elapsed after the plate drive starts from the home position.
\u2022 The alignment plate home sensor\/Rr (PS109) is not turned ON (blocked) after the set period of time has elapsed while the alignment motor\/Rr (M106) is energized when the plate returns to the home position.

<When FS-536 or FS-536SD is installed>
The alignment plate\/Rr home sensor (PS13) is not turned OFF (unblocked) or ON (blocked) even after the set period of time has elapsed while the alignment motor\/Rr (M8) is energized. <\/td>		<\/td><\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/td><\/tr>
Relevant electrical parts<\/td><When FS-533 is installed>
\u2022 Alignment motor\/Rr (M106)
\u2022 Alignment plate home sensor\/Rr (PS109)
\u2022 FS control board (FSCB)

<When FS-536 or FS-536SD is installed>
\u2022 Alignment motor\/Rr (M8)
\u2022 Alignment plate\/Rr home sensor (PS13)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n

When FS-533 is installed<\/p>\n\n\n\n

  1. Check the connector between M106-FSCB CN102 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M106 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS109-FSCB CN102 for proper connection and correct as necessary.<\/li>
  4. PS109 I\/O check, sensor check