{"id":3621,"date":"2019-05-28T17:23:44","date_gmt":"2019-05-28T17:23:44","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=3621"},"modified":"2023-12-27T14:06:38","modified_gmt":"2023-12-27T14:06:38","slug":"c0211-bizhub-658e-558e-458e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0211-bizhub-658e-558e-458e","title":{"rendered":"C0211 (bizhub 658e\/558e\/458e)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0211: Manual feed up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>\u2022 The bypass lift-up position sensor (PS26) is not turned OFF (unblock) even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
\u2022 The bypass lift-up position sensor (PS26) is not turned ON (blocked) even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.<\/td><\/tr>
Trouble isolation<\/td>Manual<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Paper feed motor (M22)
\u2022 Bypass pick-up solenoid (SD1)
\u2022 Bypass lift-up position sensor (PS26)
\u2022 Expansion control board (EXCB)
\u2022 MFP board (MFPB) (658e\/558e Part# AA6RH02103 \/ 458e Part# AA6UH02101)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the connector between M22-relay CN220-EXCB CN7 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M22 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS26-relay CN19-MFPB CN19E for proper connection and correct as necessary.<\/li>
  4. Check the connector between SD1-relay CN21-relay CN19-MFPB CN19E for proper connection and correct as necessary.<\/li>
  5. PS26 I\/O check, sensor check