{"id":392,"date":"2019-04-23T16:47:41","date_gmt":"2019-04-23T16:47:41","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=392"},"modified":"2023-12-27T18:17:46","modified_gmt":"2023-12-27T18:17:46","slug":"c2152-bizhub-c360i-c300i-c250i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c2152-bizhub-c360i-c300i-c250i","title":{"rendered":"C2152 (bizhub C360i\/C300i\/C250i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C2152: Transfer belt fault at initial position return<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The 1st transfer pressure sensor (PS39) is unable to detect “switch from retraction to pressure” or “switch from pressure to retraction” within a given period time after the 1st transfer pressure clutch (CL5) has stared engagement during an initial position return.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Fusing motor (M3)
\u2022 1st transfer pressure clutch (CL5)
\u2022 1st transfer pressure sensor (PS39)
\u2022 Expansion control board (EXCB)
\u2022 CPU board (CPUB)
\u2022 Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between M3-BASEB CN19E for proper connection and correct as necessary.<\/li>
  2. Check the connector of M3 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS39-relay CN113-BASEB CN13E for proper connection and correct as necessary.<\/li>
  4. Check the connector between CL5-relay CN118-EXCB CN14EX for proper connection and correct as necessary.<\/li>
  5. Check the connector between EXCB CN2EX-BASEB CN12E for proper connection and correct as necessary.<\/li>
  6. Check CPUB for proper installation and correct as necessary.<\/li>
  7. PS39 I\/O check, sensor check