{"id":3928,"date":"2019-05-29T16:14:14","date_gmt":"2019-05-29T16:14:14","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=3928"},"modified":"2023-12-27T14:00:06","modified_gmt":"2023-12-27T14:00:06","slug":"c6102-bizhub-658e-558e-458e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c6102-bizhub-658e-558e-458e","title":{"rendered":"C6102 (bizhub 658e\/558e\/458e)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C6102: Drive system home sensor malfunction<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection
condition<\/td>		\u2022 The scanner home sensor (PS201) is unable to detect the scanner located at its home position.
\u2022 The scanner home sensor (PS201) is unable to detect a scanner even when the scanner motor (M201) has been driven to move the scanner over the
maximum travelling distance.
\u2022 The scanner home sensor (PS201) detects the scanner when the scanner has moved the maximum travelling distance from the position, at which it
blocks the scanner home sensor (PS201).<\/td><\/tr>
Trouble isolation<\/td>Scanner<\/td><\/tr>
Relevant electrical
parts<\/td>		\u2022 Scanner home sensor (PS201)
\u2022 Scanner motor (M201)
\u2022 Scanner drive board (SCDB)
\u2022 MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Correct or change the scanner drive (pulley, gear, belt) if it is faulty.<\/li>
  2. Correct the scanner motor set screw if loose.<\/li>
  3. Adjust [Image Position: Leading Edge] and [Sub Scan Zoom Adj.].<\/li>
  4. Check the connector between M201-SCDB CN4 for proper connection and correct as necessary.<\/li>
  5. Check the connector between PS201-SCDB CN6 for proper connection and correct as necessary.<\/li>
  6. Check the connector between SCDB CN2-MFPB CN6E for proper connection and correct as necessary.<\/li>
  7. PS201 I\/O check, sensor check