{"id":402,"date":"2019-04-23T16:59:43","date_gmt":"2019-04-23T16:59:43","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=402"},"modified":"2023-12-27T18:17:46","modified_gmt":"2023-12-27T18:17:46","slug":"c2156-bizhub-c360i-c300i-c250i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c2156-bizhub-c360i-c300i-c250i","title":{"rendered":"C2156 (bizhub C360i\/C300i\/C250i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C2156: Transfer belt spacing fault after all pressure established<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>C2156: The 1st transfer pressure sensor (PS39) is turned OFF (unblocked) after the lapse of given time after the 1st transfer pressure clutch (CL5) turned OFF when the pressing operation is finished.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Fusing motor (M3)
\u2022 1st transfer pressure clutch (CL5)
\u2022 1st transfer pressure sensor (PS39)
\u2022 Expansion control board (EXCB)
\u2022 CPU board (CPUB)
\u2022 Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between M3-BASEB CN19E for proper connection and correct as necessary.<\/li>
  2. Check the connector of M3 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS39-relay CN113-BASEB CN13E for proper connection and correct as necessary.<\/li>
  4. Check the connector between CL5-relay CN118-EXCB CN14EX for proper connection and correct as necessary.<\/li>
  5. Check the connector between EXCB CN2EX-BASEB CN12E for proper connection and correct as necessary.<\/li>
  6. Check CPUB for proper installation and correct as necessary.<\/li>
  7. PS39 I\/O check, sensor check