{"id":404,"date":"2019-04-23T17:09:54","date_gmt":"2019-04-23T17:09:54","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=404"},"modified":"2023-12-27T18:17:46","modified_gmt":"2023-12-27T18:17:46","slug":"c2204-bizhub-c360i-c300i-c250i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c2204-bizhub-c360i-c300i-c250i","title":{"rendered":"C2204 (bizhub C360i\/C300i\/C250i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C2204: Waste toner transport motor failure to turn<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The turning detection sensor does not change even after the lapse of a predetermined period of time.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Waste toner box set sensor (PS46)
\u2022 Waste toner transport motor (M20)
\u2022 Expansion control board (EXCB)
\u2022 CPU board (CPUB)
\u2022 Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Clean the PS46 if it has toner or paper dust, etc.<\/li>
  2. Replacing the waste toner box.<\/li>
  3. Check the connector between M20-relay CN92-EXCB CN10EX for proper connection and correct as necessary.<\/li>
  4. Check the connector of M20 for proper drive coupling and correct as necessary.<\/li>
  5. Check the connector between PS46-EXCB CN8EX for proper connection and correct as necessary.<\/li>
  6. Check the connector between EXCB CN2EX-BASEB CN12E for proper connection and correct as necessary.<\/li>
  7. Check CPUB for proper installation and correct as necessary.<\/li>
  8. PS46 I\/O check, sensor check