{"id":4994,"date":"2019-06-05T18:28:19","date_gmt":"2019-06-05T18:28:19","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=4994"},"modified":"2023-12-21T19:08:30","modified_gmt":"2023-12-21T19:08:30","slug":"c0206-bizhub-368-308","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0206-bizhub-368-308","title":{"rendered":"C0206 (bizhub 368\/308)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0206: Tray 3 feeder up\/down abnormality (When PC-110 or PC-210 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 3 upper limit sensor (PS116) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 3<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Tray 3 lift-up motor (M113)
\u2022 Tray 3 upper limit sensor (PS116)
\u2022 PC control board (PCCB)
\u2022 MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Remove the\u00a0tray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M113-PCCB CN6 for proper connection and correct as necessary.<\/li>
  3. Check the connector of M113 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS116-relay CN24-PCCB CN4 for proper connection and correct as necessary.<\/li>
  5. PS116 I\/O check, sensor check