{"id":5076,"date":"2019-06-05T20:30:33","date_gmt":"2019-06-05T20:30:33","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=5076"},"modified":"2023-12-21T18:45:53","modified_gmt":"2023-12-21T18:45:53","slug":"15-40-bizhub-558-458","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=15-40-bizhub-558-458","title":{"rendered":"15-40 (bizhub 558\/458)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
JAM type<\/td>Misfeed at external LCT paper feed section<\/td><\/tr>
JAM code<\/td>15-40<\/td><\/tr>
JAM detection timing<\/td>For paper fed from the external LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.<\/td><\/tr>
\u2013<\/td>Paper jam of a sheet of paper left at the external LCT feed section results, if the paper feed sensor (PS3) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.<\/td><\/tr>
\u2013<\/td>Paper jam of a sheet of paper left at the external LCT feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.<\/td><\/tr>
Misfeed processing location<\/td>Lower right door<\/td><\/tr>
Relevant parts<\/td>\u2022 LU paper feed motor (M2) 
\u2022 LU paper feed sensor (PS3) 
\u2022 LU drive board (LUDB) 
\u2022 MFP board (MFPB) 
\u2022 PC control board (PCCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
Step<\/th>Action<\/th>Control signal<\/th>Location of electrical component<\/th><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>\u2013<\/td>\u2013<\/td><\/tr>
2<\/td>Make the pick-up roller load adjustment of the LCT. (LU-207<\/a> \/ LU-302<\/a>)<\/td>\u2013<\/td>\u2013<\/td><\/tr>
3<\/td>PS3 I\/O check, sensor check<\/td>LUDB CN5-8 (ON)<\/td>LU-207\/LU-302 4-G<\/td><\/tr>
4<\/td>M2 operation check<\/td>LUDB CN4-5 to 8<\/td>LU-207\/LU-302 3-G<\/td><\/tr>
5<\/td>Replace LUDB. (LU-207<\/a> Part# A87VH01000 \/ LU-302<\/a> Part# A87VH01000)<\/td>\u2013<\/td>\u2013<\/td><\/tr>
6<\/td>Replace MFPB.<\/a> (558 Part# A9HGH02102 \/ 458 Part# A9HHH02102<\/td>\u2013<\/td>\u2013<\/td><\/tr>
7<\/td>Replace PCCB. (PC-110\/PC-210<\/a> \/ PC-410<\/a>) (PC-110 Part# A2XMH00101 \/ PC-210 Part# A2XMH00201 \/ PC-410 Part# A2XMH00301)<\/td>\u2013<\/td>\u2013<\/td><\/tr><\/tbody><\/table>\n\n\n\n