{"id":5390,"date":"2019-06-10T13:25:01","date_gmt":"2019-06-10T13:25:01","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=5390"},"modified":"2023-12-21T18:10:59","modified_gmt":"2023-12-21T18:10:59","slug":"c1105-bizhub-558-458-368-308","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1105-bizhub-558-458-368-308","title":{"rendered":"C1105 (bizhub 558\/458\/368\/308)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C1105: Bundle eject motor drive malfunction<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td><When FS-536 or FS-536SD is installed>
\u2022 The gripper home position sensor (PS18) is not turned ON (unblocked) even after the set period of time has elapsed after the gripper position detection sensor (PS19) turns OFF (block).
\u2022 The gripper position detection sensor (PS19) is not turned OFF (blocked) even after the set period of time has elapsed after PS19 turns ON (unblock).
\u2022 The gripper position detection sensor (PS19) is not turned ON (unblocked) even after the set period of time has elapsed after the gripper home position sensor (PS18) turns OFF (block).
\u2022 The gripper home position sensor (PS18) is not turned OFF (blocked) even after the set period of time has elapsed after the bundle eject motor (M10) is energized.
\u2022 The gripper home position sensor (PS18) and the gripper position detection sensor (PS19) is turned ON (unblocked) at the same time. <\/td>		<\/td><\/tr>
<\/td><When FS-537 or FS-537SD is installed>
The gripper home position sensor (PS3) is not turned OFF (blocked) or ON (unblocked) even after the set period of time has elapsed after the bundle eject motor (M1) is turned ON.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-536 or FS-536SD is installed>
\u2022 Bundle eject motor (M10)
\u2022 Gripper home position sensor (PS18)
\u2022 Gripper position detection sensor (PS19)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td><When FS-537 or FS-537SD is installed>
\u2022 Bundle eject motor (M1)
\u2022 Gripper home position sensor (PS3)
\u2022 FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n

 When FS-536 or FS-536SD is installed<\/h2>\n\n\n\n
  1. Check the connector between M10-relay CN7<A>-FSCB J13 for proper connection, and correct as necessary.<\/li>
  2. Check the connector of M10 for proper drive coupling, and correct as necessary.<\/li>
  3. Check the connector between PS18-relay CN7<A>-FSCB J13 for proper connection, and correct as necessary.<\/li>
  4. Check the connector between PS19-relay CN7<B>-FSCB J12 for proper connection and correct as necessary.<\/li>
  5. PS18 I\/O check, sensor check