{"id":5446,"date":"2019-06-10T16:54:10","date_gmt":"2019-06-10T16:54:10","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=5446"},"modified":"2023-12-21T18:10:40","modified_gmt":"2023-12-21T18:10:40","slug":"c1197-bizhub-558-458-368-308","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1197-bizhub-558-458-368-308","title":{"rendered":"C1197 (bizhub 558\/458\/368\/308)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C1197: Tri-folding guide motor malfunction<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td><When FS-536SD or FS-537SD is installed>
The tri-folding gate home sensor (PS11) is not turned OFF (blocked) or ON (unblocked) even after the set period of time has elapsed while the tri-folding guide motor (M8) is energized. <\/td>		<\/td><\/tr>
Trouble isolation<\/td>Center Stapling\/Half-Fold\/Tri-Fold<\/td><\/tr>
Relevant electrical parts<\/td><When FS-536SD or FS-537SD is installed>
\u2022 Tri-folding guide motor (M8)
\u2022 Tri-folding gate home sensor (PS11)
\u2022 SD control board (SDCB)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the connector between M8-SDCB J8 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M8 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS11-SDCB J8 for proper connection and correct as necessary.<\/li>
  4. PS11 I\/O check, sensor check