{"id":5609,"date":"2019-06-11T16:22:18","date_gmt":"2019-06-11T16:22:18","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=5609"},"modified":"2023-12-21T17:59:20","modified_gmt":"2023-12-21T17:59:20","slug":"c3102-bizhub-558-458","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c3102-bizhub-558-458","title":{"rendered":"C3102 (bizhub 558\/458)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C3102: Heating roller failure to turn (bizhub 558)<\/td><\/tr>
Rank<\/td>A<\/td><\/tr>
Trouble detection condition<\/td>The hard latch signal from one or both of the heating roller rotation latch detection 1 and the heating roller rotation latch detection 2 is turned ON.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Fusing unit
\u2022 Heating roller rotation sensor (PS37)
\u2022 Fusing motor (M3)MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the fusing unit for proper installation and correct as necessary.<\/li>
  2. Check the connector between M3-MFPB CN14E for proper connection and correct as necessary.<\/li>
  3. Check the connector of M3 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between the fusing unit-relay CN100-MFPB CN13E for proper connection and correct as necessary.<\/li>
  5. PS37 I\/O check, sensor check