{"id":578,"date":"2019-04-25T14:18:14","date_gmt":"2019-04-25T14:18:14","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=578"},"modified":"2023-12-27T18:16:24","modified_gmt":"2023-12-27T18:16:24","slug":"c6103-bizhub-c360i-c300i-c250i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c6103-bizhub-c360i-c300i-c250i","title":{"rendered":"C6103 (bizhub C360i\/C300i\/C250i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td> C6103: Slider over running <\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The scanner home sensor (PS201) detects the scanner at its home position during a period of time that begins with the time when a prescan command and a scan preparation command are executed and ends when a home return command is executed. <\/td><\/tr>
Trouble isolation<\/td>Scanner<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Scanner home sensor (PS201)
\u2022 Scanner motor (M201)
\u2022 Scanner drive board (SCDB)
\u2022 CPU board (CPUB)
\u2022 Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Correct or change the scanner drive (pulley, gear, belt) if it is faulty.<\/li>
  2. Correct the scanner motor set screw if loose.<\/li>
  3. Adjust [Image Position: Leading Edge] and [Sub Scan Zoom Adj.].<\/li>
  4. Check the connector between M201-SCDB CN4 for proper connection and correct as necessary.<\/li>
  5. Check the connector between PS201-SCDB CN6 for proper connection and correct as necessary.<\/li>
  6. Check the connector between SCDB CN2-BASEB CN6E for proper connection and correct as necessary.<\/li>
  7. Check CPUB for proper installation and correct as necessary.<\/li>
  8. PS201 I\/O check, sensor check