{"id":5995,"date":"2019-06-17T13:47:27","date_gmt":"2019-06-17T13:47:27","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=5995"},"modified":"2023-12-21T17:51:00","modified_gmt":"2023-12-21T17:51:00","slug":"c0204-bizhub-958-808","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0204-bizhub-958-808","title":{"rendered":"C0204 (bizhub 958\/808)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0204: Tray 2 feeder up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 2 upper limit sensor (PS14) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 2<\/td><\/tr>
Relevant electrical parts<\/td>Tray 2 upper limit sensor (PS14)Tray 2 lift-up motor (M8)Paper feed\/transport drive board (PFTDB)MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Remove the tray and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M8-PFTDB CN24 for proper connection and correct as necessary.<\/li>
  3. Check the connector of M8 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS14-relay CN155B-PFTDB CN12 for proper connection and correct as necessary.<\/li>
  5. PS14 I\/O check, sensor check