{"id":6053,"date":"2019-06-17T14:28:37","date_gmt":"2019-06-17T14:28:37","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=6053"},"modified":"2023-12-21T17:50:41","modified_gmt":"2023-12-21T17:50:41","slug":"c0211-bizhub-958-808","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0211-bizhub-958-808","title":{"rendered":"C0211 (bizhub 958\/808)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0211: Manual feed up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>\u2022 The bypass upper limit sensor (PS35) is not turned ON (blocked) even after the bypass lift-up motor (M26) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
\u2022 The bypass lower limit sensor (PS36) is not turned ON (blocked) even after the bypass lift-up motor (M26) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.<\/td><\/tr>
Trouble isolation<\/td>Manual<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Bypass lift-up motor (M26)
\u2022 Bypass upper limit sensor (PS35)
\u2022 Bypass lower limit sensor (PS36)
\u2022 Paper feed\/transport drive board (PFTDB)
\u2022 MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the connector between M26-relay CN195B-PFTDB CN9 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M26 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS35-relay CN195B-PFTDB CN9 for proper connection and correct as necessary.<\/li>
  4. Check the connector between PS36-relay CN180-relay CN195A-PFTDB CN3 for proper connection and correct as necessary.<\/li>
  5. PS35 I\/O check, sensor check