{"id":6348,"date":"2019-06-17T18:49:06","date_gmt":"2019-06-17T18:49:06","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=6348"},"modified":"2023-12-21T17:29:38","modified_gmt":"2023-12-21T17:29:38","slug":"93-10-bizhub-958-808","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=93-10-bizhub-958-808","title":{"rendered":"93-10 (bizhub 958\/808)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
JAM type<\/td>Misfeed at duplex transport section<\/td><\/tr>
JAM code<\/td>93-10<\/td><\/tr>
JAM detection timing<\/td>The ADU paper passage sensor\/2 (PS48) is not turned ON (unblocked) even after the set period of time has elapsed after the ADU paper passage sensor\/1 (PS47) turns ON (block) by the paper. <\/td><\/td><\/tr>
–<\/td>Paper jam of a sheet of paper left at the duplex transport section results, if the ADU paper passage sensor\/1 (PS47) is turned ON (blocked) or the ADU paper passage sensor\/2 (PS48) is turned ON (unblocked) when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.<\/td><\/tr>
–<\/td>When the main power switch is turned ON, residual paper detection starts between each sensor. Paper jam of a sheet of paper left at the duplex transport section results, if the the ADU paper passage sensor\/1 (PS47) is turned from OFF (unblocked) to ON (blocked).<\/td><\/tr>
–<\/td>When the main power switch is turned ON, residual paper detection starts between each sensor. Paper jam of a sheet of paper left at the duplex transport section results, if the ADU paper passage sensor\/2 (PS48) is turned from OFF (blocked) to ON (unblocked).<\/td><\/tr>
Misfeed processing location<\/td>Duplex door<\/td><\/tr>
Relevant parts<\/td>\u2022 ADU transport motor\/1 (M31)
\u2022 ADU transport motor\/2 (M32)
\u2022 ADU paper passage sensor\/1 (PS47)
\u2022 ADU paper passage sensor\/2 (PS48)
\u2022 Paper feed\/transport drive board (PFTDB)
\u2022 MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
Step<\/th>Action<\/th>Control signal<\/th>Location of electrical component<\/th><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>PS47 I\/O check, sensor check<\/td>PFTDB CN28-3 (ON)<\/td>7-P<\/td><\/tr>
3<\/td>PS48 I\/O check, sensor check<\/td>PFTDB CN28-6 (ON)<\/td>6-P<\/td><\/tr>
4<\/td>M31 operation check<\/td>PFTDB CN28-14 to 17<\/td>8-P<\/td><\/tr>
5<\/td>M32 operation check<\/td>PFTDB CN28-10 to 13<\/td>7-P<\/td><\/tr>
6<\/td>PFTDB F10 conduction check<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace PFTDB.<\/a> (Part# A796H00200)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace MFPB.<\/a> (Part# A796H02003)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n