{"id":6451,"date":"2019-06-18T02:53:29","date_gmt":"2019-06-18T02:53:29","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=6451"},"modified":"2023-12-21T16:59:51","modified_gmt":"2023-12-21T16:59:51","slug":"c3102-bizhub-958-808","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c3102-bizhub-958-808","title":{"rendered":"C3102 (bizhub 958\/808)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C3102: Heating roller failure to turn<\/td><\/tr>
Rank<\/td>A<\/td><\/tr>
Trouble detection condition<\/td>During any state other than printing operation, the hard latch signal from one or both of the heating roller rotation latch detection 1 and the heating roller rotation latch detection 2 is turned ON.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Fusing unit
\u2022 Fusing belt rotation sensor (PS56) (bizhub 958)
\u2022 Heating roller rotation sensor (PS56) (bizhub 808)
\u2022 Fusing motor (M30)
\u2022 MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the fusing unit for proper connection and correct as necessary.<\/li>
  2. Check the connector between M30-MFPB CN16E for proper connection and correct as necessary.<\/li>
  3. Check the connector of M30 for proper drive coupling and correct as necessary.<\/li>
  4. Check the fusing unit-relay CN260-MFPB CN30E for proper connection and correct or change as necessary.<\/li>
  5. PS56 I\/O check, sensor check