{"id":8995,"date":"2019-07-01T12:59:50","date_gmt":"2019-07-01T12:59:50","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=8995"},"modified":"2023-12-21T15:33:09","modified_gmt":"2023-12-21T15:33:09","slug":"10-01-bizhub-364e-284e-224e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=10-01-bizhub-364e-284e-224e","title":{"rendered":"10-01 (bizhub 364e\/284e\/224e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
JAM type<\/td>Misfeed at manual bypass feed section<\/td><\/tr>
JAM code<\/td>10-01<\/td><\/tr>
Detection timing<\/td>The leading edge of the paper does not unblocked the registration sensor (PS1) even after the lapse of a given period of time after the manual bypass starts to feed paper.<\/td><\/td><\/tr>
–<\/td>In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened \/ closed or jam\/trouble reset is done, it is regarded as paper jam at manual bypass feed section.<\/td><\/tr>
Misfeed processing location<\/td>Right door<\/td><\/tr>
Relevant parts<\/td>\u2022 Transport motor (M1)Registration clutch (CL4)
\u2022 Bypass paper feed clutch (CL7)
\u2022 Bypass pick-up solenoid (SD1)
\u2022 Registration sensor (PS1)
\u2022 Front side board (FRB)
\u2022 Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical component<\/td><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>PS1 I\/O check, sensor check<\/td>FRB CN8-3 (ON)<\/td>4 to 5-L<\/td><\/tr>
3<\/td>CL4 operation check<\/td>FRB CN8-7 (CL4_24V)<\/td>4-L<\/td><\/tr>
4<\/td>CL7 operation check<\/td>PRCB CN27-8 (ON)<\/td>3-C<\/td><\/tr>
5<\/td>SD1 operation check<\/td>PRCB CN27-10 (ON)<\/td>4-C<\/td><\/tr>
6<\/td>M1 operation check<\/td>PRCB CN31-2 (REM)PRCB CN31-5 (LOCK)<\/td>bizhub 364e 21-Jbizhub 284e 23-Jbizhub 224e 24-J<\/td><\/tr>
7<\/td>PRCB ICP5 conduction check<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FRB<\/a> (Part# A61FH00500)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace PRCB<\/a> (Part# A61FH00101)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n