{"id":9037,"date":"2019-07-01T15:29:20","date_gmt":"2019-07-01T15:29:20","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=9037"},"modified":"2023-12-21T15:32:50","modified_gmt":"2023-12-21T15:32:50","slug":"32-01-bizhub-364e-284e-224e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=32-01-bizhub-364e-284e-224e","title":{"rendered":"32-01 (bizhub 364e\/284e\/224e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
JAM type<\/td>Misfeed at exit section<\/td><\/tr>
JAM code<\/td>32-01<\/td><\/tr>
Detection timing<\/td>
The ADU paper passage sensor\/1 (PS40) is not blocked even after the lapse of a given period of time after the reverse sequence is started. <\/td>		<\/td><\/tr>
–<\/td>The paper exit sensor (PS3) is blocked when the main power switch is unblocked, a door or cover is opened and closed, or a misfeed or malfunction is reset.<\/td><\/tr>
–<\/td>In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened \/ closed or jam\/trouble reset is done, it is regarded as paper jam at exit section.<\/td><\/tr>
Misfeed processing location<\/td>Right door<\/td><\/tr>
Relevant parts<\/td>\u2022 Fusing motor (M3)
\u2022 Reverse motor (M4)
\u2022 ADU transport motor (M5)
\u2022 Paper exit clutch (CL8)
\u2022 Paper exit sensor (PS3)
\u2022 ADU paper passage sensor\/1 (PS40)
\u2022 Front side board (FRB)
\u2022 Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical component<\/td><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>PS3 I\/O check, sensor check<\/td>PRCB CN21-7 (ON)<\/td>18-C<\/td><\/tr>
3<\/td>PS40 I\/O check, sensor check<\/td>PRCB CN21-10 (ON)<\/td>18-C<\/td><\/tr>
4<\/td>CL8 operation check<\/td>PRCB CN13-16 (ON)<\/td>22-C<\/td><\/tr>
5<\/td>M3 operation check<\/td>PRCB CN2-9 (REM)PRCB CN2-12 (LOCK)<\/td>26-I to J<\/td><\/tr>
6<\/td>M4 operation check<\/td>PRCB CN12-4 to 7<\/td>25-C<\/td><\/tr>
7<\/td>M5 operation check<\/td>PRCB CN21-1 to 4<\/td>17 to 18-C<\/td><\/tr>
8<\/td>Replace FRB<\/a> (Part# A61FH00500)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace PRCB<\/a> (Part# A61FH00101)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n