{"id":9151,"date":"2019-07-01T19:18:40","date_gmt":"2019-07-01T19:18:40","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=9151"},"modified":"2023-12-21T15:31:22","modified_gmt":"2023-12-21T15:31:22","slug":"c0204-bizhub-364e-284e-224e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0204-bizhub-364e-284e-224e","title":{"rendered":"C0204 (bizhub 364e\/284e\/224e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Tray 2 feeder up\/down abnormality<\/td><\/tr>
Trouble code<\/td>C0204<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td>The tray 2 upper limit sensor (PS22) is not blocked even after the lapse of a given period of time after the lifting motion has been started.<\/td><\/tr>
Trouble isolation<\/td>Tray 2<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Tray 2 lift-up motor (M13)
\u2022 Tray 2 upper limit sensor (PS22)
\u2022 Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M13-PRCB CN20 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M13 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS22-relay CN40-PRCB CN19 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS22 I\/O check, sensor check<\/td>PRCB CN19-6 (ON)<\/td>9-C<\/td><\/tr>
5<\/td>M13 operation check<\/td>PRCB CN20-5 (REM)<\/td>2-C<\/td><\/tr>
6<\/td>Replace M13<\/a> (Part# 9J06M10300)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>PRCB ICP4 conduction check<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace PRCB<\/a> (Part# A61FH00101)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n