{"id":9362,"date":"2019-07-02T16:01:42","date_gmt":"2019-07-02T16:01:42","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=9362"},"modified":"2023-12-21T15:30:28","modified_gmt":"2023-12-21T15:30:28","slug":"c1103-bizhub-364e-284e-224e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1103-bizhub-364e-284e-224e","title":{"rendered":"C1103 (bizhub 364e\/284e\/224e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Alignment plate motor\/Fr’s malfunction<\/td><\/tr>
Trouble code<\/td>C1103<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-533 is installed>
\u2022 The alignment plate home sensor\/F (PS108) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position.
\u2022 The alignment plate home sensor\/F (PS108) is not blocked after the set period of time has elapsed after the alignment motor\/F (M105) is turned ON to return the plate to the home position. <\/td>		<\/td><\/tr>
<When FS-534 is installed><\/td>
\u2022 The alignment plate\/F home sensor (PS12) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position.
\u2022 The alignment plate\/F home sensor (PS12) is not blocked after the set period of time has elapsed after the alignment motor\/front (M7) is turned ON to return the plate to the home position.
\u2022 The alignment plate\/F does not reach the specified position within the set period of time.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-533 is installed>
\u2022 Alignment motor\/F (M105)
\u2022 Alignment plate home sensor\/F (PS108)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr>
<When FS-534 is installed><\/td> \u2022 Alignment motor\/Front (M7)
\u2022 Alignment plate\/F home sensor (PS12)
\u2022 FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-533 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M105-FSCB CN102 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M105 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS108-FSCB CN102 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS108 I\/O check, sensor check<\/td>FSCB CN102<\/td>FS-533 7-J<\/td><\/tr>
5<\/td>M105 operation check<\/td>FSCB CN102<\/td>FS-533 7-J<\/td><\/tr>
6<\/td>Replace M105<\/a> (Part# A2YUPPW600 )<\/td>–<\/td>–<\/td><\/tr>
7<\/td>FSCB CP105 conduction check<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FSCB<\/a> (Part# A2YUPPH901 for Model No. A2YU-WY1 or Part # A2YUPPXN00 for Model No. A2YU-WY2)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n