{"id":9390,"date":"2019-07-02T16:12:08","date_gmt":"2019-07-02T16:12:08","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=9390"},"modified":"2023-12-21T15:30:06","modified_gmt":"2023-12-21T15:30:06","slug":"c6102-bizhub-364e-284e-224e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c6102-bizhub-364e-284e-224e","title":{"rendered":"C6102 (bizhub 364e\/284e\/224e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Drive system home sensor malfunction<\/td><\/tr>
Trouble code<\/td>C6102<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td>\u2022 The scanner home sensor (PS201) is unable to detect the scanner located at its home position.
\u2022 The scanner home sensor (PS201) is unable to detect a scanner even when the scanner motor has been driven to move the scanner over the maximum travelling distance.
\u2022 The scanner home sensor (PS201) detects the scanner when the scanner has moved the maximum travelling distance from the position, at which it blocks the scanner home sensor (PS201).<\/td><\/tr>
Trouble isolation<\/td>Scanner<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Scanner home sensor (PS201)
\u2022 Scanner motor (M201)
\u2022 Scanner drive board (SCDB)
\u2022 Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Correct or change the scanner drive (pulley, gear, belt) if it is faulty.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Correct the scanner motor set screw if loose.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Adjust [Image Position: Leading Edge] and [Sub Scan Zoom Adj.].<\/td>–<\/td>–<\/td><\/tr>
4<\/td>Check the connector between M201-SCDB PJ4 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
5<\/td>Check the connector between PS201-SCDB PJ6 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
6<\/td>Check the connector between SCDB PJ2-PRCB CN43 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
7<\/td>PS201 I\/O check, sensor check<\/td>SCDB PJ6-3 (ON)<\/td>25-P<\/td><\/tr>
8<\/td>M201 operation check<\/td>SCDB PJ4-1 to 4<\/td>26-P<\/td><\/tr>
9<\/td>Replace SCDB<\/a> (Part# A5C1H01A11)<\/td>–<\/td>–<\/td><\/tr>
10<\/td>Replace PRCB<\/a> (Part# A61FH00101)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n