{"id":9403,"date":"2019-07-02T16:15:24","date_gmt":"2019-07-02T16:15:24","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=9403"},"modified":"2023-12-21T15:30:06","modified_gmt":"2023-12-21T15:30:06","slug":"c6103-bizhub-364e-284e-224e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c6103-bizhub-364e-284e-224e","title":{"rendered":"C6103 (bizhub 364e\/284e\/224e)"},"content":{"rendered":"\n

(1)Contents<\/p>\n\n\n\n
Trouble type<\/td>Slider over running<\/td><\/tr>
Trouble code<\/td>C6103<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td>The scanner home sensor (PS201) detects the scanner at its home position during a period of time that begins with the time when a prescan command and a scan preparation command are executed and ends when a home return command is executed.<\/td><\/tr>
Trouble isolation<\/td>Scanner<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Scanner home sensor (PS201)
\u2022 Scanner motor (M201)
\u2022 Scanner drive board (SCDB)
\u2022 Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Correct or change the scanner drive (pulley, gear, belt) if it is faulty.<\/td>\u2013<\/td>\u2013<\/td><\/tr>
2<\/td>Correct the scanner motor set screw if loose.<\/td>\u2013<\/td>\u2013<\/td><\/tr>
3<\/td>Adjust [Image Position: Leading Edge] and [Sub Scan Zoom Adj.].<\/td>\u2013<\/td>\u2013<\/td><\/tr>
4<\/td>Check the connector between M201-SCDB PJ4 for proper connection and correct as necessary.<\/td>\u2013<\/td>\u2013<\/td><\/tr>
5<\/td>Check the connector between PS201-SCDB PJ6 for proper connection and correct as necessary.<\/td>\u2013<\/td>\u2013<\/td><\/tr>
6<\/td>Check the connector between SCDB PJ2-PRCB CN43 for proper connection and correct as necessary.<\/td>\u2013<\/td>\u2013<\/td><\/tr>
7<\/td>PS201 I\/O check, sensor check<\/td>SCDB PJ6-3 (ON)<\/td>25-P<\/td><\/tr>
8<\/td>M201 operation check<\/td>SCDB PJ4-1 to 4<\/td>26-P<\/td><\/tr>
9<\/td>Replace SCDB<\/a> (Part# A5C1H01A11)<\/td>\u2013<\/td>\u2013<\/td><\/tr>
10<\/td>Replace PRCB<\/a> (Part# A61FH00101)<\/td>\u2013<\/td>\u2013<\/td><\/tr><\/tbody><\/table>\n\n\n\n