{"id":9415,"date":"2019-07-02T16:51:44","date_gmt":"2019-07-02T16:51:44","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=9415"},"modified":"2023-12-21T15:30:06","modified_gmt":"2023-12-21T15:30:06","slug":"c1106-bizhub-364e-284e-224e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1106-bizhub-364e-284e-224e","title":{"rendered":"C1106 (bizhub 364e\/284e\/224e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Stapler movement motors malfunction<\/td><\/tr>
Trouble code<\/td>C1106<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-533 is installed>
\u2022 The stapler home sensor (PS110) is not unblocked after the laps of given time after it started operating from the home position.
\u2022 The stapler home sensor (PS110) is not unblocked after the laps of give time after the stapler movement motor (M107) turned ON when it returned to the home position. <\/td>		<\/td><\/tr>
<When FS-534 is installed><\/td>
\u2022 The stapler home position sensor (Rear) (PS23) is not blocked or unblocked even after the set period of time has elapsed after the side stapler movement motor (M13) turned ON.
\u2022 The stapler does not reach the specified position within the set period of time.<\/td><\/tr>
Trouble isolation<\/td>Staple<\/td><\/tr>
Relevant electrical parts<\/td><When FS-533 is installed>
\u2022 Stapler movement motor (M107)
\u2022 Stapler home sensor (PS110)
\u2022 Stapler relay board (STREYB)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td> <When FS-534 is installed>
\u2022 Side stapler movement motor (M13)
\u2022 Stapler home position sensor (Rear) (PS23)
\u2022 FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-533 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M107-STREYB CN123 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M107 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS110-FSCB CN110 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS110 I\/O check, sensor check<\/td>FSCB CN110<\/td>FS-533 8-D to E<\/td><\/tr>
5<\/td>M107 operation check<\/td>STREYB CN123-5 to 8<\/td>FS-533 5-L<\/td><\/tr>
6<\/td>Replace M107<\/a> (Part# A2YUPPT400 )<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace STREYB<\/a> (Part# A2YUPPG700 )<\/td>–<\/td>–<\/td><\/tr>
8<\/td>FSCB CP107 conduction check<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace FSCB<\/a> (Part# A2YUPPH901 for Model No. A2YU-WY1 or Part # A2YUPPXN00 for Model No. A2YU-WY2)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n