{"id":9699,"date":"2019-07-03T15:34:04","date_gmt":"2019-07-03T15:34:04","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=9699"},"modified":"2023-12-21T15:26:59","modified_gmt":"2023-12-21T15:26:59","slug":"20-21-bizhub-554e-454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=20-21-bizhub-554e-454e","title":{"rendered":"20-21 (bizhub 554e\/454e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
JAM type<\/td>Misfeed at vertical transport section (tray 3)<\/td><\/tr>
JAM code<\/td>20-21<\/td><\/tr>
Detection timing<\/td><When PC-110 or PC-210 is installed>
The tray 2 vertical transport sensor (PS19) is not turned ON even after the lapse of a given period of time after the tray 3 vertical transport sensor (PS113) has been blocked by a paper. <\/td>		<\/td><\/td><\/tr>
<\/td><When PC-410 is installed>
The tray 2 vertical transport sensor (PS19) is not turned ON even after the lapse of a given period of time after the vertical transport sensor (PS133) has been blocked by a paper.<\/td><\/tr>
–<\/td>In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened \/closed or jam\/trouble reset is done, it is regarded as paper jam at vertical transport section.<\/td><\/tr>
Misfeed processing location<\/td>Right door<\/td><\/tr>
Relevant parts<\/td><When PC-110 or PC-210 is installed>
\u2022 Tray 2 vertical transport motor (M23)
\u2022 Tray 3 vertical transport motor (M112)
\u2022 Tray 2 vertical transport sensor (PS19)
\u2022 Tray 3 vertical transport sensor (PS113)
\u2022 Expansion control board (EXCB)
\u2022 Printer control board (PRCB)
\u2022 PC control board (PCCB) <\/td>		<\/td><\/tr>
<\/td><When PC-410 is installed>
\u2022 Tray 2 vertical transport motor (M23)
\u2022 Vertical transport motor (M132)
\u2022 Tray 2 vertical transport sensor (PS19)
\u2022 Vertical transport sensor (PS133)
\u2022 Expansion control board (EXCB)
\u2022 Printer control board (PRCB)
\u2022 PC control board (PCCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen PC-110 or PC-210 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical component<\/td><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>PS113 I\/O check, sensor check<\/td>PCCB CN4-14 (ON)<\/td>PC-110\/PC-210 5-C<\/td><\/tr>
3<\/td>PS19 I\/O check, sensor check<\/td>PRCB CN19-5 (ON)<\/td>bizhub 554e\/454e 9-C<\/td><\/tr>
4<\/td>M112 operation check<\/td>PCCB CN5-9 to 16<\/td>PC-110\/PC-210 3 to 4-C<\/td><\/tr>
5<\/td>M23 operation check<\/td>EXCB CN3-9 to 12<\/td>bizhub 554e\/454e 22-P<\/td><\/tr>
6<\/td>Replace EXCB<\/a> (Part# A5AYH00501)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace PRCB<\/a> (Part# A61EH00101)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace PCCB<\/a> (PC-110 Part# A2XMH00101 \/ PC-210 Part# A2XMH00201)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n